BE 13HP Operations Instructions download pdf (Page 56)

COUNTRY HOME PRODUCTS, Inc.

MEIGS ROAD, P.O. BOX 25, VERGENNES, VERMONT 05491

Daily Checklist for the DR 13 HP CHIPPER

To help maintain your DR 13 HP CHIPPER for optimum performance, we recommend you follow this

checklist each time you use your machine.

[ ] OIL: With the machine on a level surface, check the engine oil level with the dipstick and add more

if necessary (only add oil to the level indicated on the dipstick - DO NOT OVERFILL). Use

SAE 30 high detergent motor oil.

[ ] GAS: Fill the gas tank with clean, fresh, unleaded gasoline.

[ ] ENGINE AIR COOLING SYSTEM: It is very important to keep the engine clean of debris. Remove

grass and other built-up materials from the air intake screen

before, during, and after you chip. Regularly remove debris from

the blower housing and cooling fins. A dirty engine retains heat

and can cause damage to the internal engine parts.

[ ] CHIPPER HOPPER: Inspect the Chipper Hopper for accumulated debris.

[ ] KNIFE: Inspect the Chipper Knife for tightness, nicks, and wear.

[ ] WEAR PLATE: Check the Wear Plate for nicks; the edge should be square.

[ ] BELT: Check the condition of the Drive Belt for nicks and cuts.

[ ] GENERAL CONDITION: Check the general condition of the machine, e.g.; nuts, bolts, welds etc.

1 2 ... 51 52 53 54 55 56

No comments

BE 13HP Operations Instructions Page 56